Industry News

What if the excavator bucket gets hot

2022-05-21
What if the excavator bucket gets hot. In the process of using the excavator bucket, we have a fever due to long-term use. What should we do about this situation? Now let's explain to you how to deal with the heat in the excavator bucket.

(1) The volume of the oil tank is too small, the radiation area is not enough, the oil cooling equipment is not installed, or the capacity of the cooling equipment is too small.

(2) According to the selection capacity of the fast forward quantitative pump system, most of the flow is limited to the overflow and fever of the high-pressure safety valve.

(3) If the unloading circuit in the system fails or the pump cannot unload when the unloading circuit is not set to stop working, all the flow pumps overflow under high pressure, resulting in overflow loss and heat, resulting in oil heating.

(4) The pipeline bends too long and too much, resulting in local pressure loss and pressure loss.

(5) The accuracy of components is not enough, the assembly quality is poor, and the mechanical friction loss between relative movements is very large.

(6) Mating part of the gap is too small, or the gap after wear is too large, a lot of leakage, resulting in a lot of losses, such as reduced volumetric efficiency of the pump and rapid heating.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept