The signs to replace your Bucket pins and Bucket bushings.

Take a look at your pivot point and see if there is any slack. If there is, it is time to replace your bucket pins and bucket bushing. Look closely so you can specify if the movement is in the static or dynamic part of the assembly.
How do you remove the pin bushes?
First try the hammer and punch. If the pin and bushes are stubborn try welding a few beads around the inside of the bushing. If they are steel this will shrink the pin and bushing. Just be careful you do not burn through and weld them to the bore.
How do you remove seized bucket pins?
Pulling seized bucket pins is a pain. Depending on the pin and location you can press them out, pull them out with a press, or heat the surrounding area to expand it, thus driving the bucket pin out. You can burn a hole through the pin which will shrink the pin allowing you to drive it out.
Are there risks if you wait to do the repair?
Absolutely. If you wait too long to replace the pins and bushings and there is movement in the static components, the repair can no longer be completed in the field. If that happens the bores will have to be welded up and bored back to industry standard before new pins and bushes can be installed.
Impact loading due to slack will increase fatigue and accelerate distress of all iron in the proximity of excessive wear. Therefore, visual inspections are crucial to maintaining the integrity of your parts and machinery.
In need of replacement pins and bushings?
We offer pins and bushings that are designed, manufactured, and checked for maximum performance. We offer a wide range of pins and bushings which are constantly being updated. Each unit is as precise as the manufacture’s original unit, to ensure problem-free installation to your machine.

Whether you need aftermarket pins and bushings for construction equipment, the mining industry, or agricultural equipment, our pins and bushings are manufactured for strength, durability, and longevity.