+86-595-22020721
nick@peersparts.com
English English
Home > News > Industry News
Industry News

What are the excavator parts?

2022-08-01



What are the excavator parts?


Excavator parts introduction
Excavator parts refer to the parts that can make up a complete excavator, and often refer to wearable parts or removable parts according to the construction requirements in the industry.
Quanzhou Peers Construction Machinery Parts Co., Ltd. is a production and sales of excavators, bulldozers, tractors, cranes, rotary drilling rig parts as the main business of the enterprise, specializing in construction machinery imported hydraulic parts, chassis parts engine parts, and other construction machinery parts production, sales and wholesale, welcome your visit to discuss. Here we mainly talk about what are the excavator parts.
Excavator parts mainly contain the following components.
① standard size arm, excavator extension arm, extension size arm (including two-section extension arm and three-section extension arm, the latter is the demolition arm)
②standard bucket, rock bucket, reinforced bucket, gutter bucket, grid bucket, screen bucket, cleaning bucket, tilt bucket, thumb bucket, trapezoidal bucket.
③ bucket hooks, rotary hydraulic grapple buckets, hydraulic grapple jaws, grapplers, wood grapplers, mechanical grapple jaws, quick-change couplings, loosening jaws.
④ excavator quick connector, excavator cylinder, crushing hammer, hydraulic shear, hydraulic tamper, vibrating hammer, bucket teeth, tooth seat, crawler, bracket wheel, supporting wheel.
⑤ engine, hydraulic pump, distribution valve, center slewing, slewing bearing, travel drive, cab, manipulation valve, relief valve, main control multiway valve, etc.
⑥ electrical parts, including starter motor computer board | automatic refueling motor | lever assembly | display | throttle pull cable | solenoid valve | Shaw | horn button | relay | instrument panel | fuse | monitor | control panel | air conditioning compressor | full vehicle wiring harness | suction pump | governor | connector | timer | plug | preheat resistor | fuse | operating lights | fuse diesel meter | horn assembly | controller | switch | magnetic switch | hydraulic pump pressure switch | oil pressure switch | flameout switch | ignition switch | sensor | water temperature sensor | oil sensor | diesel sensor | automatic throttle motor sensor | sensor | single-leg sensor | angle sensor | speed transducer | pressure sensor
Undercarriage parts: including; guide wheel | carrier wheel | support wheel | drive gear | chain | chain pass | chain pin | bucket shaft | four wheels and one belt | chain track assembly | guide wheel bracket | rotation support | track | rubber track | track assembly | track plate | tensioning device | tensioning cylinder seat | tensioning cylinder | universal cross shaft | chain plate screw | large spring | chain plate | link | chain guard | bottom guard.
The company mainly deals with excavator and bulldozer chain assembly, guide wheel, supporting wheel, carrier wheel, tooth ring (tooth block) various pin bushings, bucket teeth, knife plate, screws, and other excavator parts which are widely used in various types of excavators, bulldozers, cranes, rotary drilling machines, slag raking machines, and other crawler-type construction machinery.

Previous:

The function of bucket bushing

Next:

What are the types of excavator parts?
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept